Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Starke
Garage door repair in Starke typically runs $150 – $600, and most repairs are completed in a single visit. We’re Holloway Garage Door Repair, a garage-door specialist led by Pete Strickland, and we spend our days on the doors Starke actually has: single-bay shop doors, pole barn doors, and carport frames on ranch homes and older manufactured houses. That matters here, because the standard 16-foot two-car door an installer in Gainesville or Jacksonville keeps on the truck often won’t fit a Starke opening. We measure what’s in front of us.
Call (866) 389-5046 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm. The price is quoted and agreed before any work starts.
Why Starke Homeowners Call Holloway Garage Door Repair for Garage Door Repair
Garage doors are all we do. Every technician and every tool in our trucks is built around this one trade, not spread across a dozen home-service categories. When you call for a door in Starke, you get someone who works on doors every day and knows the difference between a worn roller and an opener on its way out.
We’re brand-agnostic, so we work on the opener and the door you already have. That’s often a decade-old LiftMaster on a shop wall, a Craftsman remoted into a carport, or a Wayne Dalton sectional on the house. No hand-off to a different contractor when the job crosses from hardware to opener to panels. And “Holloway” is on the truck because it’s our name, not a franchise number.
Holloway has served this part of North Central Florida since 2017. The rural stretches around Starke are familiar ground, and so is the pattern where a door that’s the only entry to the house or shop fails after a storm. Local knowledge isn’t a slogan here. It’s knowing that the frame you’re looking at probably shifted a decade ago and that the door on it was never a standard width to begin with.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Spring Repair in Starke
Garage Door Spring Repair in Starke usually runs $180 – $340 for one spring, and it’s the repair we do most often on rural Bradford County properties. A torsion spring carries most of the door’s weight, so when it goes, the door becomes a 150 – 350 pound slab and the opener starts doing work it was never built for. On the shop and barn doors around here, springs also pit and corrode years ahead of an inland door because of the salt-laden humid air, so cycles run out early.
Why springs here fail sooner
Humidity and salt in the air attack the wire itself. A spring that looks fine on the outside can be corroded into a solid coil inside, which is what we find more often than not. Waiting on a strained spring usually means the opener pays for it next.
What a spring job involves
We match the spring to the actual door weight and drum, then re-clock the new hardware and check the bearing plates while we’re in there. Springs under load are dangerous to handle without the right winding bars and training, so this is a job for a technician, not a weekend project. A matched pair is usually replaced together, which costs about twice the single-spring range. The written estimate sets the final price.
Garage Door Sensor Repair in Starke
Garage Door Sensor Repair in Starke is most often a misalignment or wiring problem after a summer storm, and it generally fits inside our $150 – $600 repair range. The photo-eye sensors at the bottom of the track tell the opener the doorway is clear. When they’re knocked crooked, wet, or fed by corroded wire, the door reverses, refuses to close, or stops halfway.
The storm and power-blip pattern
Heavy afternoon thunderstorms and hurricane-season wind events rattle the brackets that hold the sensors. Rural power blips then scramble the opener’s logic, and on well-pump properties the door is sometimes the only way in, so a sensor fault locks people out. We realign the eyes, check the wiring and the opener’s travel settings, and replace brackets that have rusted through.
Agricultural-grade hardware for shop doors
Shop and barn openers cycle far more than a house door and often were never sized for it. We fit heavier-duty sensor mounts and stainless fasteners so the hardware survives the humidity instead of rusting off the frame.
Trusted Brands We Service in Starke
We work on the brand you already have. That includes LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Around Starke we see a lot of LiftMaster on shop walls and Craftsman in carports, plus Wayne Dalton sectionals on the houses. Because we carry the parts for those systems, we’re not ordering a sensor bracket or a roller and waiting a week. Matching a spring, opener, or a new door to what’s already in your garage cuts the compatibility guesswork, and it keeps the turnaround short. From a stuck spring to a full new door, it’s one company, not a chain of subcontractors.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Starke Homes
- Corroded torsion springs and rusted hinges. Salt-laden humid air pits the spring wire and rusts fasteners years ahead of inland doors, so spring cycles run out early and openers strain to lift a door the springs no longer carry.
- Rust at the bottom stile on barn and carport doors. Steel panels on pole barns and carports rust along the bottom stile, and the wooden jambs behind them swell and rot, which throws the track out of alignment and chews through the weather seal.
- Shifted wood frames on non-standard openings. Many Starke garages are single-bay or open carports on older wood or metal frames that have moved over time, so track alignment and spring sizing get measured job-by-job instead of pulled off a standard chart.
- Stuck doors after rural power blips. On well-pump properties the opener was often never upgraded for frequent cycling, and some homes and shops have no manual release access, so a power blip leaves the door stuck.
Pricing for Garage Door Repair in Starke, FL
Typical estimated repair work in Starke lands between $150 and $600, depending on what failed and what has to come off to reach it. A single spring is $180 – $340, and a matched pair is about twice that. Roller replacement runs $110 – $220, track realignment $120 – $240, and opener repair $120 – $320. New panel replacement sits around $250 – $500 per door, and new door installation runs $700 – $2,200. What moves the number is parts and labor, the door weight, whether the frame has shifted, and whether the hardware is standard or has to be sized to the opening. The estimate is free and the written quote sets the final price.
| Repair | Typical Range in Starke |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
| Opener Repair | $120 – $320 |
| Garage Door Repair (general) | $150 – $600 |
Call (866) 389-5046 for an exact quote. Estimates are free.
We Also Serve Cities Near Starke
Starke sits in rural Bradford County, and we also work in Keystone Heights, Alachua, Hawthorne, and up through Gainesville. If your door is outside the city and you’re not sure we cover it, ask. Our garage door repair team handles the whole spectrum, from a stuck spring to a full new door.
Serving Starke, FL – Our Local Coverage Area
We serve Starke and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Starke
Salt-laden humid air pits the spring wire and rusts the hinge and fastener hardware years ahead of an inland door, so cycles run out early and the opener ends up straining to lift a 150 – 350 pound door the springs can no longer carry. On a shop door that cycles hard, that gap is even shorter. Call (866) 389-5046 for an exact quote, and estimates are free.
Yes. Most Starke doors are non-standard single-bay widths on detached shops, pole barns, and carport frames, so sizing and spring matching are done job-by-job on the actual opening. We don’t assume a 16-foot two-car door. Call (866) 389-5046 for an exact quote, and estimates are free.
Once a year is the reasonable rhythm here, and more often for a barn or shop door that lives in the weather. We check the springs, hinges, rollers, tracks, and fasteners for rust and pitting before a torn-up spring takes the opener down with it. Call (866) 389-5046 for an exact quote, and estimates are free.
The brackets holding the sensors get knocked crooked, the wiring corrodes, or a rural power blip scrambles the opener’s travel settings, so the door reverses or refuses to close. Realigning the eyes and checking the wiring gets it back to a clean close. Call (866) 389-5046 for an exact quote, and estimates are free.
It’s usually the spring, because a door the springs no longer carry puts the weight on the opener. Sometimes a worn gear in the opener makes it groan too, so we test both before recommending a part. Call (866) 389-5046 for an exact quote, and estimates are free.
If your door is jammed, sagging, or the opener is grinding away at a job it shouldn’t be doing, call Holloway Garage Door Repair today. We work on the brand you already have, we size the parts to your actual opening, and we stand behind every repair. Call us at (866) 389-5046 for a free estimate. The price is quoted and agreed before any work starts.
Written by Pete Strickland, Owner at Holloway Garage Door Repair, serving Starke since 2017.